![cisco asa asdm manual cisco asa asdm manual](https://itexamanswers.net/wp-content/uploads/2021/06/2021-06-15_140449.jpg)
All outbound communication (from inside to outside) will be translated using Port Address Translation (PAT) on the outside public interface. The firewall will be configured to supply IP addresses dynamically (using DHCP) to the internal hosts. Refer to the diagram below for our example scenario. Interface Ethernet0/0 will be connected to the outside (towards the ISP), and Ethernet0/1 will be connected to the Inside LAN switch. Also, the internal LAN network belongs to subnet 192.168.10.0/24. Assume that we are assigned a static public IP address 100.100.100.1 from our ISP.
![cisco asa asdm manual cisco asa asdm manual](https://static.wixstatic.com/media/3c62a9_5c0534242fac43e1b6be3bc9a1c3ee3f.jpg)
Next we will see a simple Internet Access scenario which will help us to understand the basic steps needed to setup an ASA 5510.
#Cisco asa asdm manual license#
Also, the security plus license enables two of the five firewall network ports to work as 10/100/1000 instead of only 10/100. The second one (security plus) provides some performance and hardware enhancements over the base license, such as 130,000 Maximum firewall connections (instead of 50,000), 100 Maximum VLANs (instead of 50), Failover Redundancy, etc. Like the smallest ASA 5505 model, the 5510 comes with two license options: The Base license and the Security Plus license. This device is the second model in the ASA series (ASA 5505, 5510, 5520 etc) and is fairly popular since is intended for small to medium enterprises. I’m offering you here a basic configuration tutorial for the Cisco ASA 5510 security appliance. This article gets back to the basics regarding Cisco ASA firewalls.